Welcome to London's Audi Specialists.We have a team of Audi specialists who can sort out anything from basic Audi servicing to advanced technical Audi cars problems. One of the best Audi Master Technician on site offering knowledge and experience using the latest Audi Main Dealer compulsory diagnostics equipment.

A large proportion of the production is based at Group headquarters in Ingolstadt, as well as technical development, sales and administration. Here, in addition to the A3/S3 and the A3/S3 Sportback, Audi produces the plug-in hybrid model A3 e-tron as well as the A3 g-tron, which can run on natural gas, gasoline or e-gas produced by Audi. The Audi RS 3 Sportback, the models in the A4 family as well as the A5 Coupé, A5 Sportback and the RS 5 Coupé are also manufactured here. The Audi Q2, the latest model in the product portfolio of AUDI AG, also rolls off the production line in Ingolstadt.

Article source: www.audi.com

The RS Q3 combines a unique lifestyle and the benefits of an SUV with quattro technology and a thrilling five-cylinder design that is deeply rooted in motorsport history. The result is nothing less than a sporty redefinition of crossover cars.

With its enhanced-performance engine, the new Audi RS Q3 performance is a highly dynamic SUV with an unmistakably athletic character. It combines striking design with extraordinary signature features.

Asphalt or ice, urban traffic or snow-covered forest roads: Vorsprung is at its most impressive when it is able to tackle extreme conditions head-on. The turbocharged 2.5-liter TFSI engine has a power output of 250 kW (340 PS) – reliably brought to the roads by permanent quattro four wheel drive.

Superlative performance with five cylinders, in combination with even more dynamic driving: the Audi RS Q3 performance. The power output of the 2.5-liter TFSI engine from the RS Q3 has been increased to 270 kW (367 PS). This allows the car to sprint from 0 to 100 km/h in just 4.4 seconds.

Article source: www.audi.com

Audi represents Vorsprung durch Technik. That means thinking today about the future of mobility. But it’s not just a question of design or performance – it’s also a question of how to power our cars to get from A to B. And from today to tomorrow.

We are pushing forward innovations in this area: not simply by building efficient engines, but also by developing alternative drive and mobility concepts. By also seeking inspiration from nature for new sources of power that allow us to travel new paths. An innovative contribution to this goal is made by our Audi g-tron models – in combination with Audi e-gas. One example is the Audi A5 Sportback g-tron¹: 80% less CO2/km with Audi e-gas technology purely in gas mode (CNG) on a well-to-wheel assessment (a calculation of emissions that includes both the production of fuel and the running of a vehicle) compared with the Audi A5 Sportback 2.0 TFSI²with 140 kW. As a g-tron customer, you can refuel as usual at any CNG filling station. AUDI AG ensures that the total amount of gas consumed by the vehicle, calculated on the basis of legal standards for measuring fuel consumption and emissions as per NEDC/WLTP and statistical data on the annual mileage of Audi g-tron models that were ordered during the period 7 March 2017 to 31 May 2018 is replaced by Audi e-gas – for a period of three years after first registration as a new vehicle (the amount of CO2 saved is also calculated on this basis and may be lower in actual practice when running the vehicle). The Audi e-gas is fed into the European natural gas network, replacing fossil natural gas.

Another step towards our vision of premium carbon-neutral mobility.

With the Audi g-tron models and Audi e-gas as fuel from our own production sites and from partner facilities, the approach we are taking for our drive solutions isn’t just a matter of efficient engines, but also of the ecology of the entire energy system. A matter of enabling mobility that’s innovative before the vehicle has even driven a single metre. That’s the idea behind “Vorsprung starts before you drive”. And behind the combination of Audi g-tron and Audi e-gas. Find out more about our holistic drive concept here.

Audi e-gas is a fuel that we developed in our own production facilities. It is made using renewable energy sources, water, CO2 and waste materials. Various processes are used to extract CO2 from the atmosphere, which is then converted into Audi e-gas by biomethane and power-to-gas plants. The power-to-gas plants split water into hydrogen and oxygen exclusively using renewable energy. The oxygen is released into the air and the hydrogen reacts with CO2from the biomethane plant to form methane: our Audi e-gas. The biomethane plants demonstrably only use waste materials in which CO2 is also bound. This gives Audi e-gas an important advantage: the exact overall amount of CO2 that is emitted by the vehicle according to standard consumption is bound in the fuel. The additional CO2 emissions generated by the construction of the fuel plants, transport and compression of the fuel at filling stations are included, so that on an overall assessment CO2 emissions can be reduced by 80%³. That means we don’t just focus on efficient fuel consumption, but also on the production of the fuel itself.

Back in 2013, Audi commissioned the world’s first industrial-scale power-to-gas plant: the Audi e-gas plant in Werlte. For the first time, large quantities of fluctuating energy generated from wind and solar power could be stored in the natural gas grid on a long-term basis. Very effective, because the expansion of fluctuating energy sources like wind means that it’s increasingly common for excess power to be generated. The power-to-gas process makes use of this excess power as fuel for mobility, which is why we believe the Audi e-gas project can be a crucial element and driver of energy transition.

Alongside this solution for the g-tron fleet, we are also working to develop other synthetic liquid fuels that could have a potential to reduce CO2 that is similar to Audi e-gas. We call them Audi e-fuels. One example is Audi e-benzin, which is currently under development – and is already being tested in our Audi models.

Article source: www.audi.com

Piloted driving on the autobahn – Audi is already providing the public with an insight into the mobility of the future. With demonstration drives on board an Audi A7 piloted driving concept, selected brand customers and fans will get their first experience of piloted driving on the A9 north of Munich.

The customer trips in the Audi A7 piloted driving concept, nicknamed “Jack,” start in the myAudi Sphere at Munich airport. The route goes via the A9 – part of the “Digital Motorway Test Bed. With a normal traffic flow, the piloted journey takes around 60 minutes. An Audi expert is always on board. After the journey participants are asked for their opinion, with their impressions incorporated into the development of future automated driving functions.

The opportunity to ride in “Jack” will start on July 20 and run through to August. Potential test drivers are targeted via various communications channels, including the social media sites run by Audi Germany. At the same time, Audi Business Innovation GmbH has raffled places to users of its premium mobility service Audi on demand. Participants in the “Miles and More” program can also swap accumulated miles for a trip in “Jack.”

Audi has already used the A7 piloted driving concept test vehicle on three continents since 2015. On the A9 it can drive at speeds up to 130 km/h (80.8 mph). It accelerates, brakes and changes lane predictively and smoothly while cooperating with other road users.

The experience from the test drives with “Jack” has been incorporated into the development of piloted driving. The highlight here is the central driver assistance controller (zFAS) which uses signals from all the sensors to continuously generates a detailed image of the surroundings. The zFAS – the size of a laptop – is fitted for the first time as standard in the new Audi A8. The luxury sedan was premiered last week at the Audi Summit in Barcelona and has been developed for highly automated driving as per SAE Level 3. The Audi AI traffic jam pilot will allow the driver to hand over the driving task to the car on freeways in slow moving traffic at speeds up to 60 km/h (37.3 mph).

Article source: www.audi.com

Even more distinctive, sportier and faster: The new Audi Sport Performance Parts take dynamic handling to a wholly new level for the Audi R8 (combined fuel consumption in l/100 km: 12.3 – 11.4*; combined CO2 emissions in g/km: 287 – 272*) sports car and the Audi TT. The retrofit range will be available in dealers in late summer 2017 and features numerous components.

“With the Audi Sport Performance Parts we are tapping into a new business segment,” says Stephan Winkelmann, Managing Director of Audi Sport GmbH. “Our wealth of experience garnered over many years of building sports cars is incorporated into every component we offer. Along with our expertise from motor racing, which is still the best test bed for volume production.”

As part of the sales launch of the retrofit range in late summer 2017, the product lineup will initially be available in Germany and other markets for the current Audi R8 and Audi TT models (TT, TTS [combined fuel consumption in l/100 km: 7.5 – 6.7*; combined CO2 emissions in g/km: 173 – 155] and TT RS [combined fuel consumption in l/100 km: 8.5 – 8.2*; combined CO2 emissions in g/km: 194 – 187*]) only. Additional model series will follow gradually. The Audi Sport Performance Parts cover four areas to date: suspension, exhaust system, exterior and interior.

For suspension requirements, the range covers sport brake linings, which are more powerful and less prone to fading than standard brake linings. Linings are available for steel discs and for the optional ceramic brakes. Their carrying plates are painted in fluorescent red and are made out of ultralight titanium on the Audi R8, making this model a kilogram (2.2 lb)lighter overall.

Steel front brake discs with multiple bolt mountings are available for the Audi TT RS. Various brake cooling kits can be obtained for the Audi TT, TTS and TT RS. They help the compact athlete achieve even better braking performance.

A two- or three-way coilover suspension is available for the Audi TT models and both Audi R8 variants. The fully milled, black 20-inch wheels – for all R8 and TT models too – are also taken straight from motor racing. They reduce weight by up to 7.2 kilograms (15.9 lb) on the Audi TT and up to 8 kilograms (17.6 lb) on the Audi R8. The associated sport tires come in the sizes 245/30 R20 (R8, front) and 305/30 R20 (R8, rear); 255/30 R20 tires are fitted all round on the Audi TT. For the TT coupés with quattro drive, the retrofit range includes a cross-member reinforcement bar on the rear axle. It improves rigidity and makes handling even more precise. Audi TT RS owners can also subsequently increase their car’s top speed to 280 km/h (174.0 mph).

The specialist supplier of exhaust systems, Akrapovic d.d., has designed a sonorous, ultralight muffler made of titanium including trims specifically for the Audi TTS and the Audi TT RS.

The most spectacular offers in the Audi Sport Performance Parts are the Aero kits, which were developed in the Audi wind tunnel. For the Audi R8 and the Audi TT they add clear-cut highlights on the front air inlets, the side sills and the diffuser. They also substantially improve downforce: On the Audi R8 the downforce is 250 kg (551.2 lb) at 330 km/h (205.1 mph), an increase of over 100 kg (220.5 lb). The effect at 150 km/h (93.2 mph) is even more pronounced – the downforce is doubled at this speed to 52 kg (114.6 lb) thanks to the Aero kit. There is also a splitter and flics at the front as well as a large fixed rear wing. An engine hood with large air vent is also available for the Audi TT. All parts are made out of carbon fiber-reinforced polymer (CFRP) for the Audi R8 and for the Audi TT out of CFRP and plastic; all of them feature the Audi Sport logo.

Attractive parts for the interior round off the range. A sport contour steering wheel with multifunction plus is available for the Audi R8 and for the Audi TT; its Alcantara-trimmed rim features a red 12 o’clock marking. CFRP shift paddles are available for the models fitted with seven-speed S tronic. Audi Sport has developed a strut cross brace specifically for the TT – also made out of CFRP. It replaces the rear seats, reduces the weight by some 20 kilograms (44.1 lb) and enhances the torsional rigidity. The brace improves handling particularly when cornering at speed.

Article source: www.audi.com

More Articles...

Latest Audi News